Phone Systems | Business Phones

LED Strobe Light Kit

$160.00

Add to Cart:

Ringing Phone or TTY indication for the hearing impaired
• Ringing phone indication in loud warehouses and factories
• Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc.
• Alarm indication for security systems or alarm panels with phone dialers
• Durable polycarbonate lens
• High output long life LED technology
• Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash
• 6 programmable beacon and strobe brightness settings
• Immune to shock and vibration
• Flush mount or surface mount with weatherproof single gang box (included)
• 3/4” knockouts for connecting conduit, etc.
• Strobe and control module may be installed separately
• Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure
• One set of (NO) normally open and (NC) normally closed relay contacts provided
• Selectable ring cadence mode (strobe light will remain flashing between rings)
• Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
• On/off switches for ring detection and off-hook/loop detection
• Disable input, ideal for use with two-button emergency phones like Viking’s E-1600-20A (DOD# 215), will not activate strobe light on “Info” calls
• Power: 120V AC to 12V DC adapter provided
• Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
• Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft
• Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
• Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0”)
• Shipping Weight: 1.5 kg (3.3 lbs)
• Operating Temperature: -26° to 54°C (-15° to 130° F)
• Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
• Minimum Loop Current: 15 mA
• Minimum Ring Voltage: 25V RMS
• Ringer Equivalence: 0.5 A REN
• Disable/Info Switch Input: 50mA/80mW maximum
• Humidity - BLK-4: 5% to 95% non-condensing
• Mounting: Fasten to wall, post, etc. with complete surface mounting hardware included
• Connections: Color coded wires with gel-filled butt connectors


Add to Cart:


This product was added to our catalog on Tuesday 18 February, 2014.


Your IP Address is: 23.22.240.119
Copyright © 2018 E System Sales, Inc. Phones and Electronic Systems 800 619 9566. Powered by Zen Cart