Gondola Shelving

Sitemap

Contact Us

Link Link Link Store Fixtures Phone Systems

Hardware Store Shelving

Wall Store Shelving

Wall Store Shelving

A Wall Section includes one Basic Upright with Cap, one Base Shelf, one Kickplate, one Back Panel and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner.

Gondola Store Shelving

Gondola Store Shelving

A Gondola Section includes one Basic Upright with Cap, two Base Shelves, two Kickplates, two Back Panels and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner for two piece backs.

Hardware Store Shelving

Tilted Bin Merchandiser used primarily in hardware stores and plumbing supply houses

The tilted bin merchandiser is intended for organizing densely spaced, lightweight products such as small nuts, bolts and pipe fittings. It offers a 4" high profile and has a 15 degree down-slope.
It can be used for small electrical parts, plastic pipe fittings, trial size items, nuts, bolts, screws, and other parts. Dividers are ordered separately.

Hardware Store Shelving

Madix Wire Grid Shelving

Madix Wire Grid Shelving

Bracket with hardware included for hanging Wire Grid Shelves in Gondola/Wall shelving. Sahara is standard finish.

Madix Lumber and Pipe Display

Rigid, heavy duty for vertically displaying lengths of plastic or metal pipe, conduit, guttering or other similar items. Use two shelves per four foot section.

Lumber Shelf

Mop & Broom Display for Gondola Shelving

Mop & Broom Display for Gondola Shelving

The Mop and Broom Display is composed of two components which should be ordered together. The Bottom Shelf component rests on the Base Shelf of a Wall or Gondola section. It secures to the shelf with wire tabs that insert into the shelf perforations.

The Upper Shelf component mounts into the Standard Uprights. Each unit has five compartments measuring approx. 9 5/8” wide. Available in 20", 22", and 24" depths and 4' width only.

Lawnmower Shelf for Gondola

The Wire Grid Lawnmower Shelf hangs at a 30 degree downslope in Madix Gondola/Wall sections. It has a 4” front lip with a 1 1/4” price tag molding attached, offering a full inch for customer supplied signage.

Since the shelf is Wire Grid, shoppers may look under the shelf to examine the undercarriage of mowers. Smaller mowers may fit two per shelf. Larger mowers will only fit one per shelf. Maximum load capacity of Wire Grid Lawnmower Shelf is 150 lbs.

Wall or Gondola Storage Racking System

Wall or Gondola Storage Racking System

Hypermaxi rack systems adds extra storage and stability for heavy merchandise to any wall or gondola island shelving aisles.

 

Wide Span Racking

Wide Span racking is a popular display for Hardware Stores and is more of a heavy duty display system designed for heavy bagged items from pet food to bagged cement, small machinery and most larger hand and power tools.

Wide Span Wire Display

Configured from Madix Wide Span Racking components to display and store large amounts of cable and wire of most all sizes.

Wide Span Garden Tool Display

Wide Span Garden Tool Display

Configured from Madix Wide Span Racking components to display all types of large and small garden tools.  This is a single side display that is best configured against a wall.

eXTReMe Tracker
Hit Counter

Hardware Store Shelving